Freeze Drying Chambers and Equipment
Chemglass Life Sciences Drying Chamber, #50 O-Ring Joint, Lower Vessel 50mm ID X 100mm Height, Airfree, Schlenk, #75 Clamp Size, #229 O-Ring Size
Chamber for use in drying small quantities of material in dram vials. Can also be used in the transfer of materials from glovebox to glovebox or to the vacuum line. Lower vessel has a flat bottom permitting it to be stood upright on the bench or in a glovebox. Top adapter has a 0-4mm Chem-Vac Chem-Cap valve. Complete item is supplied with the corresponding CG-150 S.S. pinch clamp and one Viton o-ring.
Med Vet International Miltex Vantage Splinter Removal Kit, includes V96-312 And V96-400
The Miltex Vantage V96-410 Splinter Removal Kit contains everything you need for removing splinters. This kit contains:(1) 4.5in. Walter Splinter Forceps (1) 5in. Splinter Liberator (1) Carrying Case
Chemglass Life Sciences Drying Apparatus, Abderhalden, Modified, Complete, 695mm Height x 435mm Width
Drying Apparatus, Abderhalden, Modified, Complete, 695mm Height x 435mm Width. Modified Abderhalden drying apparatus with a 57mm flat o-ring connection between the desiccant flask and the drying chamber to permit easy sample removal after drying. The drying chamber has an I.D. of 2” and is 8” long. The desiccant flask has a 4mm glass stopcock and a serrated connection for the vacuum source. The flask and condenser joints are 24/40. Complete apparatus consists of a drying chamber, desiccant flask, condenser, clamp and Viton o-ring.
Bellco Glass, Inc. Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Port Thermowell a
Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Port Thermowell a
Sigma Aldrich Fine Chemicals Biosciences Drying tube complete for B1EA
The Buchi B-585 glass drying oven (Z563080 and Z616818) has a completely replaceable drying tube assembly. Assembly comes with the drying tube desiccant bulb and removeable vacuum connections. A maximum of 100 mL to 250 mL can be dried using the drying accessory. If required the drying tube can be ventilated with protective gas. The drying hood can be filled with a drying SOLUTIONon (silica gel CaCl2 or P2O5) to dry strongly hygroscopic substances.
Bellco Glass, Inc. Material: 316l SST with electropolish finish, ra 32 or better, inside & outDimensions: harvest tube (3/8" od) - 1" above slug, 10 9/32" insertion lengthAddition tube (1/4"od) - 1" above slug, 2 21/64" belowVent tube (1/4" od) - 1" above slug, .975" bel
Material: 316l SST with electropolish finish, ra 32 or better, inside & outDimensions: harvest tube (3/8" od) - 1" above slug, 10 9/32" insertion lengthAddition tube (1/4"od) - 1" above slug, 2 21/64" belowVent tube (1/4" od) - 1" above slug, .975" bel
Bellco Glass, Inc. 316-l stainless steel ra32 or better finish.040" drilled holes sparger for low profile vertical side arm vessels.Threaded end is removable for cleaning.Comes with 45mm blue polypropylene open top cap and silicone gasket.Triple tube configuration with
316-l stainless steel ra32 or better finish.040" drilled holes sparger for low profile vertical side arm vessels.Threaded end is removable for cleaning.Comes with 45mm blue polypropylene open top cap and silicone gasket.Triple tube configuration with
Bellco Glass, Inc. Rtd temperature sensor fits into a Thermowell to register the temperature of the media inside a vessel. This sensor connects to a temperature controller with solenoid valve to activate either a heating blanket for heating or a coil for cooling. Dimens
Rtd temperature sensor fits into a Thermowell to register the temperature of the media inside a vessel. This sensor connects to a temperature controller with solenoid valve to activate either a heating blanket for heating or a coil for cooling. Dimens